Bowmotor '2' 5000rpm/6.8HP
The Bowmotor '2' 5000rpm/6.8HP motor is an upgrade from our Bowmotor '1'. This motor is 196mm long x 112mm and has 20 splines.
This motor will fit all TDS winches, 8274, Gigglepin and Redwinch, but please be aware, these motors are 21mm longer than the standard motor. So please check you have space in your fitting kit.
These motors will also fit the Superwinch Husky, but the length maybe an issue in your fitting kit.
They are available in 12 and 24 volt and come with the standard motor bolts.
PLEASE NOTE THESE MOTORS DO NOT FIT WARN 9.5Ti, 9.5CTi or HS9500.
They feature heavy duty copper armature windings, which are copper welded to the commutator, with highly efficient ball bearings at each end.
Four enormous long lasting brushes enable the motor to run cooler.
Other motors available are Bowmotor '1':
https://goodwinch.com/product/bowmotor-1-4000rpm-5-6hp/
Bowmotor '2 Plus':
https://goodwinch.com/product/bowmotor-2-plus-6000rpm-8-0hp/
We also have spare brush packs in stock:
https://goodwinch.com/product/bowmotor-brush-sets-for-bow-1-and-bow-2/
If you are into your Challenge events?, why not have a Turbo Power Controller to enable you to winch in faster:
https://goodwinch.com/product/goodwinch-turbo-power-controller-3/
While you are changing your motor, why not uprate you solenoids at the same time.
If your winch is clicking, there could be a fault with the motor or solenoid. Below are 2 links on 'How to Test your motor' and How to Test your solenoids'