This Air Con bumper is made in the United Kingdom at a UK based fabricator. It is made from 5mm laser cut steel and powder coated black. This bumper is made so that you don't have to cut into the grille and therefore there should be little or no adjustment when fitting. The bumper will take most low line centrally mounted winches, and we would recommend our TDS-9.5c http://goodwinch.com/product/goodwinch-tds-9-5c-9500-lbs-12v-or-24v/ or a TDS-9.5i Bridge model http://goodwinch.com/product/goodwinch-tds-9-5i-with-solenoids-9500-lbs-12v/ depending on your preference. The bumper is pre-drilled to take Swivel Recovery Eyes & Tested Shackles http://goodwinch.com/product/stainless-steel-swivel-recovery-eyes/ These bumpers are usually in stock and ready to go.